The Design of Horizontal Boring Mills

The Design of Horizontal Boring Mills

 One of the most indispensable machines in a manufacturing setting are horizontal boring mills. There are many designs to this piece of machinery and its design depends on the need of the process. Despite the many designs, the basic set up of horizontal boring mills remain the same.

Horizontal boring mills use rotary cutters to remove unwanted material and debris from products made in the manufacturing process. The cutters are laid out horizontally on a flat plane. With a specific objective in mind, the boring process creates holes and other designs on large manufactured parts. The process can also be used in modifying large items precisely.

The boring mill size can be from inches to several feet long. There is spindle stroke bar where the rotary cutters are attached. This spindle stroke bar is the heart of the horizontal boring mills operation. When the spindle rotates, the cutters are spun along it creating the boring effect that produces the hole or holes in the material. 

Horizontal Boring Mills Ensure Accuracy and Precision

Because of the movement of this spindle mechanism, one of the major issues during operation of the borer is the accuracy of the mechanism as it makes its way through the material. This accuracy is essential especially for high precision machinery is involved. In order to maintain the accuracy of horizontal boring mills, a tailstock attachment is often included in the boring spindle. This tailstock would keep the spindle at a straight line and absorb the vibrations that are a by-product of metal on metal friction. Without it, there would be no straight lines and there would be imperfections in the high precision result.

As previously stated, the design of horizontal boring mills is simple, but effective with the task at hand. If there is a need to bore holes requiring a very high degree of precision, finding the right machine would help complete the project. 

Thanks for the useful information peeps
Posted by: Janice | August 4, 2017, 1:54 pm
I dont even use the vertical mills anymore.
Posted by: Mark | July 20, 2017, 1:37 pm
*** Your email address will not be published.