New

FG

  • ✓ Movable portal, fixed table — Unlike the FP, the workpiece stays clamped on a fixed table while the portal itself travels 7 000-13 000 mm in X.
  • ✓ Fixed table to 3 000 x 12 000 mm — Table plate width is 2 000, 2 500 or 3 000 mm and length 6 000, 8 000, 10 000 or 12 000 mm.
  • ✓ Same milling headstock as FP — The headstock runs to 5 000 or 6 000 rpm and travels 3 600-4 600 mm horizontally in Y, matching the FP's headstock but fixed on a portal that moves instead of a table.
  • ✓ 1 550 mm ram, FERMAT's own heads — The ram strokes up to 1 550 mm in Z; FERMAT's own UHAmi SDHS and PHAmi S heads, and other optional heads, mount on this headstock.

Technical parameters

Units
Parameter Units mm
Spindle taper ISO 50 / BT 50 / CAT 50 — optional BIG Plus, HSK 100A
Spindle speed (max.) rpm 5 000/6 000
Max. Power Heidenhain or SIEMENS CNC (S1/S6) kW 43 / 60; 53 / 77,9
Max. Torque Heidenhain or SIEMENS CNC (S1/S6) Nm 917/1274; 1591/2338
X-axis Travel of the Portal mm 7 000/9 000/11 000/13 000
Y-axis Horizontal Travel of Headstock mm 3 600/4 100/4 600
Z-axis Vertical Travel of Ram mm 1 550
Fixed table plate width mm 2 000/2 500/3 000
Fixed table plate length mm 6 000/8 000/10 000/12 000
Rapid Feed X, Y mm/min. 15 000
Rapid Feed Z mm/min. 20 000

Imperial values are shown where an exact equivalent exists. Parameters without one — spindle taper, power, torque and speeds — keep their original value.

Description

The FG is FERMAT's gantry-type milling machine with a movable portal running over a fixed table, for medium-size and large workpieces that stay clamped in place. The portal travels 7 000-13 000 mm in X, the milling headstock 3 600-4 600 mm horizontally in Y at up to 5 000 or 6 000 rpm, and the ram strokes up to 1 550 mm in Z. The fixed table is available from 2 000 x 6 000 mm up to 3 000 x 12 000 mm. FERMAT's own UHAmi SDHS and PHAmi S heads, plus other milling heads, mount on the same headstock.

Photos

01 / 06
FG

Request an offer

Tell us about your machine and we'll take it from there.