WFC 10/11 (L)
New

WFC 10/11 (L)

  • ✓ Cross-type layout, compact footprint — The column is static and the workpiece moves in both X and Z, fitting a rigid cast-iron machine into a small footprint — suited to shops with limited floor space and to serial production.
  • ✓ Ø 100/110 mm spindle, 730 mm stroke — Two-stage gearbox and three-belt drive up to 4 000 rpm, with a 250 mm support sleeve supplied as standard.
  • ✓ Active thermal compensation — The headstock is monitored by four temperature sensors, cooled by an automatic air/oil gearbox circuit, and the control corrects spindle dilation in the Z axis automatically.
  • ✓ T5 rotary table, 5 000 kg — Cross-roller bearing, master–slave B-axis drive through two CNC-controlled servomotors and four hydraulic clamping brakes.

Technical parameters

Units
Parameter Units WFC 10/11WFC 10 L
Spindle diameter mm 100/110
Spindle taper — ISO 50 / BT 50 / CAT 50
Spindle speed (max.) rpm 4000 (opt. 5000)
Main Power Heidenhain or SIEMENS CNC (S1/S6) kW 31/46,5
Max. Torque Heidenhain or SIEMENS CNC (S1/S6) Nm 1416/2124
Main Power FANUC CNC (S1/S3) kW 30/37
Max. Torque FANUC CNC (S1/S3) Nm 1370/1692
X-axis Cross Travel of Table mm 1250/2000
Y-axis Vertical Travel of Headstock mm 1250/1700/2000
Z-axis Longitudinal Travel of Table mm 1250 1500
W-axis Spindle Travel mm 730
Rapid Feed X, Y, Z mm/min 12000/12000/8500 30000
Rapid Feed W mm/min 8000 12000
Rapid Feed B rpm 2 (5 optional) 10
Max. Table Load kg 5000
Table Size mm 1000×1120 / 1250×1400 / 1250×1800 / 1400×1600 / 1400×1800

Imperial values are shown where an exact equivalent exists. Parameters without one — spindle taper, power, torque and speeds — keep their original value.

Description

The WFC 10 is a cross-type horizontal boring and milling machine for single-setup work on workpieces up to 5 tonnes, built for shops with limited floor space and suited to serial production. The column stays fixed while the workpiece travels in both axes, so the machine keeps the rigidity of a fully cast-iron structure — CNC rotary table included, driven by two servomotors — in a smaller footprint than a comparable floor-type. Headstock, column, beds, tables and heads are all designed and built by FERMAT in-house, which keeps accuracy repeatable and spares on the shelf.

Compatible accessories

Angle and facing heads, rotary tables, pallet changers and automatic changing systems compatible with this model. Pick a category to filter.

Angle & facing heads

Angular, universal and facing heads that extend the reach and capability of the spindle.

Automation

Pallet changers and clamping systems that keep the machine cutting while the next part is set up.

Automatic changing systems

Automatic head- and pallet-changing systems for unattended, multi-operation running.

automatic-c-axis — FERMAT accessory
Angle & facing heads

Automatic C-axis 0.001°

Manual heads are typically positioned manually, after screws that keep the head in position, are released. This restriction can be removed by adding an adapter - automatically positioned C-axis - between headstock and the milling head. Therefore manual head becomes automatic, where positioning of C-axis is faster and more accurate.

Parameters

ParameterValue
Indexing0,001°
Range of C-axis± 180°
Max. speed8,5/7,3 rpm
Max. torque830/976 Nm
Clamping force of brake3033/3427 Nm
Sensor accuracy±3,8''
Positioningautomatic positioning by servo motor
Clamping to headstockautomatic or manual
Suitabilitythis adapter is suitable for all types of headstocks

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
Cogsdill ZX facing and contouring head
Angle & facing heads

Cogsdill ZX Facing & Contouring Head

Facing and contouring head with a single tool slide that accepts a range of top tooling. External turning, grooving, taper boring, radius forming, chamfering, recessing and threading are all finished in one set-up, without taking the component off the table. Modular slide adapters are available in Capto®, KM® and other tooling systems. Six sizes from ZX 200 to ZX 900.

Parameters

ParameterUnitsZX 200ZX 300ZX 420ZX 500ZX 700ZX 900
Tool slide lengthmm200300420500700900
Body diametermm200300305400500700
Max. radial strokemm38.176.2101.6101.6127.0127.0
Facing head widthmm200300248248250250
Facing head lengthmm307343343343370370
Max. boring diametermmø381ø650ø770ø850ø1120ø1500
Max. boring tool lengthmm210270310310310310
Max. facing diametermmø500ø800ø980ø1060ø1330ø1700
Tool slide adapter widthmm65102102102102102
Max. speedrpm800500350300250150
Stroke ratio2 : 11 : 11 : 11 : 11 : 11 : 1
Feedmm/rev0.4
Max. torquedaNm10080080080010001000
Weightkg107168175205170200
Repeatability accuracymm0.003
Backlashmm±0.025
Boring accuracyH7

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
dandrea-facing-head — FERMAT accessory
Angle & facing heads

D'Andrea UT

D'Andrea UT is a CNC facing head that connects to the machine's U-axis for automatic, program-controlled facing, boring, reaming and threading, interpolating with the other machine axes for concave and convex radiuses. It comes in four sizes — UT 3-360 S, UT 5-500 S, UT 5-630 S and UT 5-800 S — with plate diameters from 360 mm to 800 mm, radial U-axis traverse from 120 mm to 250 mm and boring accuracy to H7.

Parameters

ParameterUnitsUT 3-360 SUT 5-500 SUT 5-630 SUT 5-800 SFHA 65
Plate diametermm360500630800650
Radial traverse U-axismm120160200250200
Max. speedrpm500315250200250
Maximum boring diametermm8001000125014401300
Boring accuracyH7
Approx. weightkg130230350530350
Connection to headstockmanual/automatic
Clamping of toolsmanual / CAPTO C6 / CAPTO C8manual / CAPTO C6 / CAPTO C8manual / CAPTO C6 / CAPTO C8manual / CAPTO C6 / CAPTO C8Manual -
Positioningautomatic
Lubricationmanual by grease
Compatibility spindle Ø / model110-180130-180130-180130-180 (WRF)130-180 (WRF)

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
ohm-20 — FERMAT accessory
Angle & facing heads

OHM Orthogonal Manual Milling Head

OHM 20 is FERMAT's two-axis orthogonal manual milling head, manually attached to the headstock like the UHM 20 and PHM 20 on the same spindle taper (SK 50) and maximum speed (2000 rpm). Where the UHM 20 and PHM 20 index freely at any angle, the OHM 20 positions its two axes in fixed 2.5° steps, with manual tool clamping/unclamping, external coolant as standard and grease lubrication.

Parameters

ParameterValue
Spindle speed10-2000 rpm
Max. Torque1000 Nm
Tool TaperSK 50
Tool Clamping Force20±15% kN
Positioning2.5°/2.5°
External tool coolantstandard
Lubricationmanual by grease

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
phm-20 — FERMAT accessory
Angle & facing heads

PHM Right Angular Milling Head

Manual right-angular milling head. Positioned and clamped by hand; available in two sizes.

Parameters

ParameterUnitsPHM 20PHM 37
Spindle speedrpm10–200010–3000
Max. torqueNm10002000
Tool taperSK 50 (DIN, MAS 45°, ANSI)SK 50 (DIN, MAS 45°, ANSI)
Tool-clamping forcekN20 ±15%
Positioning / indexingany °any°/2,5°
External tool coolantstandard
Coolant through spindle-optional
Lubricationmanual by grease
Tool clampingmanualhydraulic

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
UHM universal milling head
Angle & facing heads

UHM Universal Milling Head

Two-axis universal manual milling head, manually attached to the headstock. Available in two sizes — UHM 20 (manual tool clamping) and UHM 30 (hydraulic tool clamping). Outside coolant standard.

Parameters

ParameterUnitsUHM 20UHM 30
Spindle speedrpm10–200010–3000
Max. torqueNm10001600
Tool taperSK 50 (DIN, MAS 45°, ANSI)SK 50 (DIN, MAS 45°, ANSI)
Tool clampingmanualhydraulic
Tool-clamping forcekN20 ±15%
Positioning / indexingany °any°
Outside coolantstandard
Coolant through spindlenot possibleoptional
Lubricationmanual by grease
Compatibilityall machines, including small headstocks of WFC 10 and WFT 11machines with spindle diameter 130 mm and bigger

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
zps-pallet-changer — FERMAT accessory
Automation

ZPS - Zero point clamping system

A pallet clamping system that works from a zero point: modules built into the table take a pin on the pallet, so a fixture or workpiece returns to exactly the same position every time it is put back on the machine. The pin is held by two pistons, clamped by the force of eight springs and released pneumatically — mechanically locked when the machine is cutting, air only to let go. Unlike the shuttle and cross-wise changers, the number of removable pallets is not limited, and the system fits all types of FERMAT machines.

Parameters

ParameterValue
PrinciplePallet clamping at zero point, modules built into the table
ClampingPin held by two pistons, clamped by eight springs
ReleasePneumatic
Number of palletsNot limited
CompatibilityAll types of FERMAT machines

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
atc-20-32-40-60-90-120 — FERMAT accessory
Automatic changing systems

ATC 20/32/40/60/90/120

ATC – automatic tool changer is one of the possibilities of how to automatically change tools into spindle on FERMAT machines. The ATC can store 20/32/40/60/80/90/120 tools in the magazine. Depending on the version, the ATC can change tool into spindle of headstock (horizontal exchange), or into spindle of automatic milling head in zero position (vertical exchange).

Parameters

ParameterUnitsWFTWRF
Max. number of positions20/32/40/60/90/120
Max. tool weightkg2550
Max. tool diameter – every pocket fullmm125
Max. tool diameter – every other pocket emptymm250
Max. tool lengthmm400

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
pickup-1-position — FERMAT accessory
Automatic changing systems

Table side PICK UP

PICK-UP is used for automatic exchange of milling heads with automatic clamping on headstock. Suitable for table-type machines for tables 1600x1800 mm and bigger. • The head holder consists of two hinged arms permanently attached to the side of R plate (when arms are folded, there is no risk of holder hitting the column during rotation). • The head is accurately seated in portable frame. • For this solution, as an option, we offer also cover for the milling head, which prevents its possible damage (for example caused by flying chips during machining). • It is semi-automatic exchange of milling head, controlled and inspected by machine operator. • Fast and accurate exchange for reasonable price.

Parameters

ParameterValue
Suitable fortable-type machines for tables 1600 x 1800 mm and bigger
Head holdertwo hinged arms permanently attached to the side of table plate (folded arms: no risk of hitting the column during rotation)
Exchange typesemi-automatic, controlled and inspected by machine operator
Head seatingaccurately seated in a portable frame

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY

Photos

01 / 01
WFC 10/11 (L)

Request an offer

Tell us about your machine and we'll take it from there.