Floor-type boring and milling machines for large, heavy workpieces that cannot be carried on a table.
The WF 13/15 R (L) is FERMAT's floor-type horizontal boring mill for coordinate drilling, boring and threading of large, heavy workpieces set on floor plates or a rotary table. A 130 mm or 150 mm spindle travels 800 mm in the W axis, the ram advances a further 700 mm in Z, and the headstock covers 2 000-3 500 mm of vertical travel while the column crosses 4 000-22 000 mm in X. The cast structure is built to absorb vibration during heavy cuts, and the headstock takes FERMAT's automatic milling heads and other accessories.
The WRF 130/150/160/180 is FERMAT's large floor-type horizontal boring mill series for very large, heavy workpieces, offered with a boring headstock (130, 150, 160 or 180 mm spindle, 800-1000 mm spindle travel, optional tilting) or a milling headstock (5 000 rpm, no boring spindle) for fast milling and drilling of medium and large parts. The column is a massively constructed, annealed weldment; the boring headstock is cast iron GGG60 with a digitally-controlled servomotor regulating spindle rpm. Workpieces sit on floor plates or rotary tables rated to 100 t.
The WRF Heavy is FERMAT's largest floor-type horizontal boring mill, built for oversized workpieces that need a wider, taller working envelope than the standard WRF series. Its headstock sits between two columns rather than one, with four servomotors and four rack-and-pinion drives moving it along a 4 000-10 000 mm Y-axis travel. The 150 mm or 160 mm spindle extends 1 000 mm in W, and the ram strokes 1 600 mm in Z. Workpieces are set on floor plates or a rotary table rated to 100 t.
Tell us about your machine and we'll take it from there.