New

FP

  • ✓ Movable table sized to the part — The table travels up to 8 500 mm in X and is available in plate sizes from 4 000 x 2 000 mm to 8 000 x 3 000 mm, so it can be matched to the workpiece.
  • ✓ 25 000 kg table load — The table carries up to 25 000 kg.
  • ✓ Milling headstock to 6 000 rpm — The milling headstock runs to 5 000 or 6 000 rpm and travels 3 600-4 600 mm horizontally in Y.
  • ✓ 1 550 mm ram travel — The ram strokes up to 1 550 mm in Z, and the headstock accepts FERMAT's own UHAmi SDHS and PHAmi S heads plus other optional milling heads.

Technical parameters

Units
Parameter Units mm
Spindle taper ISO 50 / BT 50 / CAT 50 — optional BIG Plus, HSK 100A
Spindle speed (max.) rpm 5 000/6 000
Max. Power Heidenhain or SIEMENS CNC (S1/S6) kW 43 / 60; 53 / 77,9
Max. Torque Heidenhain or SIEMENS CNC (S1/S6) Nm 917/1274; 1591/2338
X-axis Travel of Table mm 4500/5500/6500/8500
Y-axis Horizontal Travel of Headstock mm 3 600/4 100/4 600
Z-axis Vertical Travel of Ram mm 1550
Table plate dimensions mm 4 000/5 000/6 000/8 000 x 2 000/2 500/3 000
Table load capacity kg 25 000
Rapid Feed X, Y mm/min. 25 000, 15 000
Rapid Feed Z mm/min. 20 000

Imperial values are shown where an exact equivalent exists. Parameters without one — spindle taper, power, torque and speeds — keep their original value.

Description

The FP is FERMAT's bridge-type milling machine with a movable table that is sized to the workpiece rather than the other way round. The milling headstock runs to 5 000 or 6 000 rpm and moves 3 600-4 600 mm horizontally in Y, while the ram strokes up to 1 550 mm in Z. The table itself travels 4 500-8 500 mm in X, carries up to 25 000 kg, and is available in plate sizes from 4 000 x 2 000 mm to 8 000 x 3 000 mm. FERMAT's own UHAmi SDHS and PHAmi S heads, plus other milling heads, mount on the same headstock.

Photos

01 / 04
FP

Request an offer

Tell us about your machine and we'll take it from there.